How to Align | Aim | Adjust Headlights LED Dual High Low Beam Pattern?

How to Align | Aim | Adjust Headlights LED Dual High Low Beam Pattern?

 

  • In this video, we are going to show you the correct way to install a two-sided LED bulb.
  • This video is compatible to all models of two-sided LED light bulbs, with the high and low beam.
  • The high beam is located slightly lower and set slightly back, further away from the low beam.
    • You can see the difference between the two here.
  • The high beam is located lower, so that it can be reflected at a higher angle.
  • In this example, the lights are not accurate. As you can see, the high beam is on top where it should be on the bottom.
  • First you must remove the chuck, by pushing down slightly and twisting counter-clockwise.
  • Rotate the chuck 180 degrees to change the angle of the LED lights.Be sure to check that the notches are aligned and then twist clockwise to lock into place.